Mold should pay attention to:
1, the mold must be mixed evenly before use to ensure that products play zui good performance.
2, the mold before the use of the mother mold surface cleaning and smoothing process to ensure good product zui stripping performance.
3, the mold when used according to the need to add the company's supporting 201 silicone oil, the amount of 5-15%, silicone oil added too little may affect the operation and defoaming function, add too much may affect the product tear resistance and heat resistance .
4, after the mold, please tightly sealed to prevent excessive evaporation of its water, affecting the curing efficiency.
5, mold use, please be sure to prevent impurities and water mixed with, otherwise it may affect its performance.
6, the use of the proposed mold to add the company supporting the mold silica special reinforced cloth, which can greatly improve the life of silicone mold.
7, the amount of mold hardening agent, please strictly control it, must not Destructive Enthusiasm, blindly increase the amount, which will seriously affect the service life of the mold.
8, mold production is completed after 24 hours before they can put into production use, otherwise it will reduce the service life of the mold.